go back

Contents: Technical

chapter-page #Chapter Title
1-9 illust.: FI for one cylinder engine
1-10 illust.: FI for V-8
2-15 illust.: FI for throttle valve or hat
2-15 illust.: FI with barrel valve
2-16 illust.: FI with overpressure return
2-16 illust.: FI with idle control
2-17 illust.: FI with main bypass
2-17 illust.: FI with high speed
2-18 illust.: FI with 2nd set of injectors
4-30 equation: fuel tank volume
4-38 illust: fuel tank
5-43 equation: fuel pump flow conversion
5-49 data: fuel pump flow values
5-50 calculation: fuel pump flow conversion
6-53 illust.: barrel valve phase diagram
6-54 illust.: barrel valve phase diagram with different idle hole locations
6-59 data: idle fuel pressure recommendation
6-60 data: idle leak down result
7-72 equation: Hilborn nozzle, pressure, and power
8-78 calculation: minimum fuel line inside dia.
10-85 data: shift point vs. ET test
10-96 jetting: for higher blower overdrive (hat only)
10-100 jetting: distribution example (hat & port)
16-120 calculation: compression ratio including boost
16-122 data: compression ratios for gas
17-126 calculation: 1/4 to 1/8 mi. drag race ET & MPH conversion
18-131 calculation: power level
20-132 setup: recommended fuel line sizes
20-132 data: blower overdrive / CFM / HP
20-132 illust.: fuel injection system for blown alcohol race car example
20-133 data: blower overdrive / CFM / jetting / HP
20-133 data: A / F ratios (race car example)
20-135 spark plug readings
21-139 data: intake air flow values
A1-148 data: gear ratios (race car example)
A1-148 data: clutch settings (race car example)
A2-150 data: blown alcohol engine specs. (race car example)
A3-153 equation: engine air flow calculation
A3-154 data: Roots blower volume / rev.
A3-156 equation: air flow through Roots blower
A3-157 equation: blower overdrive calculation
A3-159 calculation: weight of air
A3-161 data: A / F ratios gas & alcohol
A3-162 equation: weight of fuel
A3-164 equation: jet area determination
A3-167 equation: jet area size
A3-168 equation: brake specific fuel consumption
A3-169 equation: fuel system pressure calculation (ROM)
A4-172 jetting examples
A5-175 tuning values: fuel weights, spec. gravity, A / F ratios
A7-183 units and abbrev.
A9-187 data: jet dia. / area conversion
A10-188 FI log (blank forms)
A11-190 template: fitting, hose end, and hose size reference
go back